ymyg.net
域名年龄: 10年2个月7天HTTP/1.1 404 Not Found 访问时间:2012年08月22日 09:49:57 连接:Keep-Alive Keep-Alive: timeout=5, max=100 动作:User-Agent 缓存控制:private, 不缓存, max-age=0 其他指令:不缓存 类型:text/html 文件大小:389
该域名无法解析为IP
一米阳光【莫名奇妙】 源于一个没前途的程序员的懒散生活日志 Home RSS Tags Message Sidebar 归档 Starred 主页 没前途 >> 程序员,四年结束了,可是还有另外的两年半,对我来说,我要如何面对呢?君有疾在蛋里,不治将恐疼! Pages: 1/25 1 2 3 4 5 6 7 8 9 10 [ View by Articles | List ] lucene.net资料收集 CEO , Jun 1 01:22 , 默认文档 , Comments(0) , Trackbacks(0) , Reads(9143) , Original Trackback is disabled. lucene.net中文经典资料(包括lucene.net源码阅读、存储文件格式等):http://www.cnblogs.com/forfuture1978/archive/2010/06/13/1757479.htmllucene.net索引文件查看器:http://www.cnblogs.com/birdshover/archive/2008/09/23/1283007.html(貌似这个对最新的版本无效了) Tags: lucene.net ubuntu屏幕分辨率 修改xorg.conf法 CEO , May 27 19:53 , Linux , Comments(0) , Trackbacks(0) , Reads(382) , Original Trackback is disabled. 本文旨在修改ubuntu下面的分辨率,不一定成功,但是至少能让你学到一点关于屏幕分辨率的一些东西! 人在井天 一直用ubuntu9.04,一直用得好好的,因为编译的原因,把系统给搞坏了,只好重装系统。因而索性升级到9.10。升级完成后,发现最高分辩率只有800x600。 查看显卡驱动,已经安装并且正常。三D桌面效果可以正常开启。 去网上求助,有网友指出,可能是系统不能正确地识别显示器,可以编写xorg.conf文件解决。 ubuntu9.10默认没有了/etc/X11/xorg.conf这个文件了,没有这个文件,系统可以正常启动成功,但是,如果这个文件有错,则系统可能不能正常启动的。也就是说,现在这个文件已经成了用户设定。如果不是必须要设定的,大可不必设定。明白了这个道理,我们只需手动新建这个文件,在里面依自己的情形添加必须设定的内容即可。 我现在是分辩率不可设,那么,只需要在里面设定这方面的内容即可,其它的都可以不管。 打开终端,输入: ================================== cd /etc/X11 sudo touch xorg.conf sudo gedit xorg.conf ================================== 上面的命令是先新建一个空的xorg.conf,然后打开这个文件进行编写。 一、xorg.conf的一般编写规则: xorg.conf文件保存有X Window的各种信息,它由数个Section/EndSecion 的区块组成,格式如下: Section "Section名称" 选项名称 "选项值" 选项名称 "选项值" …… EndSection 也就是说,一个区块以 Section "Section名称"开头,以 EndSection结尾,中间是选项。 二、显示方面的设置主要包括三个区块: monitor 设置显示器 device 设置显卡 screen 设置显示器与显卡的结合,也就是最终的显示 在显示设置方面,这三个区块似乎缺一不可。 下面提供一个范例: ====================================== Section "Device" Identifier "Configured Video Device" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection ======================================= 这个范例中,Section "Device"区块中,Identifier指定了显卡的唯一名称,这个名称可以随便取,但一定要与Section "Screen"区块中的device选项中的名称相同。在Section "Monitor"区块中,Identifier指定了显示器的唯一名称,这个名称可以随便取,但一定要与Section "Screen"区块中的Monitor选项中所指定的名称相同。Section "Screen"区块中的Identifier选项,指定了这个显卡与显示器相结合的唯一名称。这个名称也可以随便取的。这个名称需要与Section "ServerLayout" 区块中的名称相同。这个Section "ServerLayout" 区块我们一般不必编写,这里不讨论。 从上面的分析来看,这个范例不过就是指定了三个名称和这三个名称之间的关联而已。没有实质的设置。但是,这样却给我们提供了一个设置的基本框架。 这个框架我们可以原文照抄。 然后如果我们需要在显示器区块中(Section "Monitor")中增加我们的选项,可以直接在里面添加就是了。其它的两个区块也一样。 由于主要的问题是系统不能正确地识别显示器,所以主要的是我们编写一下Section "Monitor"这个区块即可。 三、编写Section "Monitor" 查了很多的资料,经自己的反复实践,这里关键的则是要正确地获取显示器的行频和场频参数,没有这个参数,其它的设置都很难做到最好。 行频 HorizSync 场频 VertRefresh 我的显示器是三星711N,网上有各种用命令获取显示器的行频和场频参数的办法,但是,我都没能获得成功,最后还是在网上搜这个显示器的详细参数,最后得到: 行频 HorizSync 30-81 场频 VertRefresh 56-75 这两个参数如果设置得不正确,据说可能烧坏显示器,弄得怕怕的。没有把握的话,还是把这两个选项注释掉吧,也就是不设。可以用另外的办法进行适当的弥补。但是,反复证明就是,其它的弥补方法都不如直接写这个。 这个弥补的办法主要是编写Modeline选项。 终端中输入命令: gtf 1024 768 60 这个1024 768是你要设的分辩率,这个60是你要设的刷新率。 得到的命令结果如下: $ gtf 1024 768 60 # 1024x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 64.11 MHz Modeline "1024x768_60.00" 64.11 1024 1080 1184
© 2010 - 2020 网站综合信息查询 同IP网站查询 相关类似网站查询 网站备案查询网站地图 最新查询 最近更新 优秀网站 热门网站 全部网站 同IP查询 备案查询
2024-10-02 18:46, Process in 0.0079 second.